Abrasives Education

8 points common knowledge of grinding wheel safety

grinding wheel safety

Welcome to forturetools,I’m Brian,
Today we are going to talk about
“8 points common knowledge of grinding wheel safety”

grinding wheel safety1,Before starting the machine tool, check the protective device of the machine and the reset switch of various movements, whether it is adjusted in place and firm.

grinding wheel protective device

 wheel protective

2,The cover to be used shall cover at least half the diameter of the grinding wheel.

The cover to be used shall cover3,Grinding wheel installed in the main shaft of grinding machine, must be idle, idling time of not less than 5 minutes.

When idling, the operator shall stand in a safe position, and shall not stand in the front or tangent direction of the grinding wheel.

surface grinding4,When using: use the excircle surface as the working surface grinding wheel,

forbid to use the flank grinding, lest the grinding wheel is broken.

5,In grinding, lever pressing is prohibited to increase the pressure on the grinding wheel.

grinding wheel feed amount6,When grinding or finishing a grinding wheel, the amount of feed shall be adequate and the grinding wheel shall be trimmed with special dressing tools. Wear protective tools at the same time.

Wear protective tools7,Before the grinding wheel stops rotating, the coolant should be closed, and the grinding wheel continues to rotate until the grinding fluid is left out so as not to affect the balance performance of the grinding wheel.

grinding-wheel with coolant fluid8,Forbid to use the grinding fluid that is destructive to the grinding tool bond. Do not use coolant at temperatures below 0 degrees celsius.

Need more help,search “forturetools” at youtube.com,or visit www.forturetools.com

Brand:forturetools web: https://forturetools.com
Main Products:grinding wheels/other abrasive tools
Contact:Mr.Brian zhao
Keep up with our socially!

Leave a Reply

Your email address will not be published. Required fields are marked *