Solar photovoltaic glass diamond grinding wheel

Solar photovoltaic glass diamond grinding wheel is metal bond with selected diamond abrasive grains.
Specially used for photovoltaic glass grinding.

Solar photovoltaic glass diamond grinding wheel specification:

Outer Diameter 150mm,200mm，220mm.
For glass thickness：3.2–4mm；
When Motor rotary speed is 2880r/min，Glass can be ground to 6-8m/min, for glass
for glass thickness 3.2mm, total service life can grind glass of 25000-30000m；
When motor speed is 3600-4600r/min，Glass can be ground to 10-12m/min,
for processing 3.2mm thickness glass, total service life can grind glass of 15000m or above。
For round edging machine

Features:

1, High efficiency, deeper cutting depth, fast removing ability of the glass uneven edges.
2, Good sharpness, no edge chipping while grinding.
3, Smooth glass edge after processing.
4, Long service life, reduce the frequency of replacing grinding wheel in periodic time.

Tips while using:
1, Choose different type, size and grit according to real usage and machine type.
2, Please adjust equipment pressure, conveying speed according to glass thickness.
3, Adjust position and angle between grinding wheel and glass according to the glass size.
4, Use sufficient cooling water while grinding.

[contact-form-7 404 "Not Found"]