Abrasives Education, Bonded abrasives

Six common methods to inspect grinding wheel crack

Six common methods to inspect grinding wheel crack

Knowing Six common methods to inspect grinding wheel crack, you will avoid any danger when using it.

Six common methods to inspect grinding wheel crack1) visual inspection
Inspect the surface of the grinding wheel for defects and damage directly with the naked eye or other instruments.

Six common methods to inspect grinding wheel crack2) acoustic inspection (percussion inspection)
The grinding wheel is vertical on the hard ground on the flat (small wheels can be hung by the center hole), using 200-300g weight wooden hammer tapping.
After the first tapping of the end of the percussion, turn the wheel 45o again, and then hit it again. If the sound is clear, there is no crack. It can be used. If the
sound is dull or hoarse, it means that there is a crack. It is strictly forbidden to use (the checked wheel must be dry and free of adhesion).

acoustic inspection3) check with the mark
According to the mark affixed on the grinding wheel, check the abrasive, bond, particle size, microstructure, hardness, shape and size of the grinding wheel, whether
it meets the requirements of use.

check with the mark4) validity issues
The new grinding wheel from the warehouse is not necessarily a qualified grinding wheel, and even the new grinding wheel purchased from the manufacturer is not
necessarily a qualified grinding wheel.Any grinding wheel has a certain period of validity.

validity issues5) texture problems
In the use of the process, if the cracks appear in the grinding wheel, it should be stopped immediately, and new grinding wheels should be replaced to prevent the
grinding wheel from crushing and wounding.

texture problems6) wear problems
any grinding wheel has its certain wear and tear requirements, wear and tear to a certain extent, you have to replace the new grinding wheel.

Brand:forturetools web: https://forturetools.com
Main Products:grinding wheels/other abrasive tools
Mail:ab******@ft***.com
Whatsapp/wechat:+8613733809594
Contact:Mr.Brian zhao
Keep up with our socially!
https://www.facebook.com/ftmabrasivetools
https://www.youtube.com/c/Ftm-abrasive-tools
https://www.linkedin.com/company/zhengzhou-forture-tools-co-ltd-