Single multi point natural diamond dresser
Diamond Dressers are made with natural diamond and synthetic materials like CVD, PCD and MCD. in steel shanks of various shapes for straight or form dressing. For truing and dressing of conventional abrasive grinding wheels. It is including Single-point, multi-point, chisel shape, straight, angle, and radius configurations. They are used for improving abrasive grinder performance by helping round the wheel and clean, shape or open the wheel face.
Electroplated diamond rotary dresser
The electroplated diamond rotary dresser is made of high strength diamond, which makes the diamond content on the working surface very high and little impurity. This kind of roller can achieve high precision without trimming.Which can be divided into two kinds: the outer plating method and the inner plating method.
Solar photovoltaic glass diamond grinding wheel
This type of diamond grinding wheel is metal bond with selected diamond abrasive grains. Specially used for photovoltaic glass grinding.
Outer Diameter 150mm,200mm，220mm.For glass thickness：3.2–4mm；When Motor rotary speed is 2880r/min，Glass can be ground to 6-8m/min, for glassfor glass thickness 3.2mm , total service life can grind glass of 25000-30000m；When motor speed is 3600-4600r/min，Glass can be ground to 10-12m/min,for processing 3.2mm thickness glass, total service life can grind glass of 15000m or above。For round edging machine
Coarse grinding diamond mounted wheel
Product Description:
Metal bond Coarse grinding diamond mounted wheel are with the rough grain size of 40#,60# and 80# grit which is suitable for ceramic, glass and stone rough grinding, it can be metal/bronze bond and electroplated bond, shape and size can be customized according to clients requirement.
Resin bond CBN grinding wheel for gear hob cutter
This type of CBN grinding wheels are specially used for gear hob cutter grinding,
before grinding, we need to use Green silicon carbide grinding wheel dress it, to make sure it has good concentricity.
During grinding, if you find the CBN wheel you are using is a little bit hard, you should slow down the line speed from 40m/s to 30m/s.
The roughness and sharpness are the most important for the CBN wheels.
